How to Fit a uPVC Door Handle

HOW TO FIT A UPVC DOOR HANDLE

Replacing or fitting a new door handle on a uPVC door is one of the easiest upgrades you can do yourself. Follow this quick and safe step-by-step guide to ensure a perfect fit and smooth handle movement.

🧰 TOOLS YOU’LL NEED

  • 🔩 Phillips screwdriver
  • ⚙️ Replacement uPVC door handle – Shop Door Handles
  • 📏 Measuring tape
  • 🧤 Safety gloves (recommended)

🔧 STEP-BY-STEP GUIDE

1️⃣ Remove the Old Handle

Unscrew the two fixing screws from the inside handle and pull both sides gently away from the door. Take care not to damage the lock cylinder underneath.

2️⃣ Measure the Screw and Spindle Centres

Measure the distance between the two fixing screws (usually 122mm or 211mm) and note the spindle length. Use these measurements to select the correct replacement handle.

3️⃣ Insert the Spindle and Align the New Handle

Insert the spindle into the lock mechanism and position the new handle over it. Ensure both sides line up with the fixing holes.

4️⃣ Tighten the Fixing Screws

Secure the handle by tightening the screws from the inside face. Don’t overtighten — this can cause the handle to bind or feel stiff.

5️⃣ Test Handle Movement

Check that the latch retracts smoothly when the handle is pressed and the lock engages properly when turned.

💡 Pro Tip: Always replace both internal and external handles together for consistent colour and alignment.

✅ NEED HELP FINDING THE RIGHT HANDLE?

Upload a photo and our team will identify your handle for you within 24 hours.

Back to blog